Abuse-resistant thermoplastic construction. External cable clamp provides firm strain relief. Back wire terminal clamps for easy secure wiring. Triple combination head screws standard - Slot/Phillips/Robertson for use in the US and Canada. 1/4 to 11/16 in cord Dia.

Abuse-resistant thermoplastic construction. External cable clamp provides firm strain relief. Back wire terminal clamps for easy secure wiring. Triple combination head screws standard - Slot/Phillips/Robertson for use in the US and Canada. 1/4 to 11/16 in cord Dia.

Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.

ELBOW CNDT PVC 45D SCH40 1.25

For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

MEETS ALL UL 498 REQUIREMENTS. PLUG BLADES FIRMLY EMBEDDED IN BODY. SIZE OF 1.48 IN W X 1.19 IN L. 15 A, 125 V. 5/16 IN CORD DIAMETER. NEMA 1-15.

Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10, 5, 1 min). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 ft with a sensing angle of 150 deg. Installs with just a screwdriver. Flood lights not included. LED compatible. UL listed.

Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.

Cable ties are ideal for all bundling and organizing tasks from the workshop to the office and from the laundry room to the kitchen, you name it and these ties will bundle it. Designed with simple enhancements that make them easy to use including a slightly bent tip to ensure easy insertion into the tie head and close serrations along it's length to promote precise adjustment when tightening. Gentle on the hands with smooth radiused edges that ensure slip through the head and finger grips on the end to provide a secure and comfortable grip when tightening.

Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.

Boston Harbor Dimmable Outdoor Lantern, (1) 60/13 W Medium A19/Cfl Lamp, Black